Datasheet4U Logo Datasheet4U.com

AD590 - 2-Wire/ Current Output Temperature Transducer

Datasheet Summary

Description

The AD590 is an integrated-circuit temperature transducer which produces an output current proportional to absolute temperature.

The device acts as a high impedance constant current regulator, passing 1µA/oK for supply voltages between +4V and +30V.

Features

  • Linear Current Output.
  • 1µA/oK.
  • Wide Temperature Range.
  • . -55oC to 150oC.
  • Two-Terminal Device Voltage In/Current Out.
  • Wide Power Supply Range.
  • . . . +4V to +30V.
  • Sensor Isolation From Case.
  • Low Cost Ordering Information.

📥 Download Datasheet

Datasheet preview – AD590

Datasheet Details

Part number AD590
Manufacturer Intersil Corporation
File Size 95.83 KB
Description 2-Wire/ Current Output Temperature Transducer
Datasheet download datasheet AD590 Datasheet
Additional preview pages of the AD590 datasheet.

📁 Similar Datasheet

  • AD590 - TWO-TERMINAL TEMPERATURE TRANSDUCER (Sensitron)
  • AD590 - 2-Terminal IC Temperature Transducer (Analog Devices)
  • AD592 - Low Cost / Precision IC Temperature Transducer (Analog Devices)
  • AD5930 - Programmable Frequency Sweep and Output Burst Waveform Generator (Analog Devices)
  • AD5932 - Programmable Frequency Scan Waveform Generator (Analog Devices)
  • AD5933 - 1 MSPS 12-Bit Impedance Converter (Analog Devices)
  • AD5934 - 12-Bit Impedance Converter (Analog Devices)
  • AD594 - Monolithic Thermocouple Amplifiers with Cold Junction Compensation (Analog Devices)
  • AD5940 - High Precision Impedance and Electrochemical Front-End (Analog Devices)
  • AD5941 - High Precision Impedance and Electrochemical Front-End (Analog Devices)
Other Datasheets by Intersil Corporation

    Full PDF Text Transcription

    Click to expand full text
    AD590 August 1997 2-Wire, Current Output Temperature Transducer Description The AD590 is an integrated-circuit temperature transducer which produces an output current proportional to absolute temperature. The device acts as a high impedance constant current regulator, passing 1µA/oK for supply voltages between +4V and +30V. Laser trimming of the chip's thin film resistors is used to calibrate the device to 298.2µA output at 298.2oK (25oC). The AD590 should be used in any temperature-sensing application between -55oC to 150oC in which conventional electrical temperature sensors are currently employed.
    Published: |