Datasheet4U Logo Datasheet4U.com

CD74HC22106 - QMOS 8 x 8 x 1 Crosspoint Switches with Memory Control

Features

  • CMOS input-voltage-level compatibility. The Master Reset has an internal pull-up resistor and is normally used with a 0.1µF capacitor. During power up all switches are automatically reset. The crosspoint switches will reset with MR = 0 even if CE is high. A 6-bit address through a 6 line to 64 line decoder selects the transmission gate which can be turned on by applying a logic ONE to the DATA input and logic ZERO to the STROBE. Similarly, any transmission gate can be turned OFF by applying a lo.

📥 Download Datasheet

Datasheet preview – CD74HC22106

📁 Similar Datasheet

  • CD74HC221 - Dual Monostable Multivibrator (Texas Instruments)
  • CD74HC20 - Dual 4-Input NAND Gates (Texas Instruments)
  • CD74HC20E - Dual 4-Input NAND Gates (Texas Instruments)
  • CD74HC20M - Dual 4-Input NAND Gates (Texas Instruments)
  • CD74HC21 - Dual 4-Input AND Gates (Texas Instruments)
  • CD74HC21E - Dual 4-Input AND Gates (Texas Instruments)
  • CD74HC21M - Dual 4-Input AND Gates (Texas Instruments)
  • CD74HC237 - High-Speed CMOS Logic 3 to 8-Line Decoder/Demultiplexer (Texas Instruments)
  • CD74HC238 - High-Speed CMOS Logic 3 to 8-Line Decoder/Demultiplexer Inverting/Noninverting (Texas Instruments)
  • CD74HC238NS - High-Speed CMOS Logic 3 to 8-Line Decoder/Demultiplexer Inverting/Noninverting (Texas Instruments)
Other Datasheets by Intersil Corporation

    Full PDF Text Transcription

    Click to expand full text
    CD74HC22106 Data Sheet January 1999 File Number 1719.5 QMOS 8 x 8 x 1 Crosspoint Switches with Memory Control The CD74HC22106 is a digitally controlled analog switch which utilize silicon-gate CMOS technology. The CD74HC22106 features CMOS input-voltage-level compatibility. The Master Reset has an internal pull-up resistor and is normally used with a 0.1µF capacitor. During power up all switches are automatically reset. The crosspoint switches will reset with MR = 0 even if CE is high. A 6-bit address through a 6 line to 64 line decoder selects the transmission gate which can be turned on by applying a logic ONE to the DATA input and logic ZERO to the STROBE.
    Published: |