X9312
Intersil Corporation
255.92kb
Terminal voltage 0v to 15v. The Intersil X9312 is a digitally controlled potentiometer (XDCP). The device consists of a resistor array, wiper switches, a control
TAGS
📁 Related Datasheet
X9313 - Digitally Controlled Potentiometer
(Renesas)
DATASHEET
X9313
Digitally Controlled Potentiometer (XDCP™) Linear, 32 Taps, 3 Wire Interface, Terminal Voltages ± VCC
FN8177 Rev 7.00 October 7, 201.
X9314 - Single Digitally Potentiometer
(Renesas)
DATASHEET
X9314
Terminal Voltages ±5V, 32 Taps, Log Taper Single Digitally Controlled Potentiometer (XDCP™)
FN8178 Rev 3.00 July 24, 2014
The Inter.
X9315 - Digitally Potentiometer
(Renesas)
DATASHEET
X9315
Low Noise, Low Power, 32 Taps Digitally Controlled Potentiometer (XDCP™)
FN8179 Rev.2.00 December 21, 2009
The Intersil X9315 is a .
X93154 - Digitally Potentiometer
(Renesas)
X93154
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTERSIL or .intersil./tsc
Low.
X93155 - Digitally Potentiometer
(Renesas)
X93155
NOT RECOMMENDED FOR NEW DESIGNS NO RECOMMENDED REPLACEMENT
contact our Technical Support Center at 1-888-INTERSIL or .intersil./tsc
Dig.
X93156 - Single Digitally Potentiometer
(Renesas)
DATASHEETNOT RECOMMENDED FOR NEW DESIGNS
NO RECOMMENDED REPLACEMENT
X93156
contact our Technical Support Center at 1-888-INTERSIL or .intersil.c.
X9317 - Digitally Controlled Potentiometer
(Renesas)
DATASHEET
X9317
Low Noise, Low Power, 100 Taps, Digitally Controlled Potentiometer (XDCP™)
The X9317 is a digitally controlled potentiometer (XDCP™)..
X9318 - Digitally Potentiometer
(Renesas)
X9318
Digitally Controlled Potentiometer (XDCP™)
FEATURES
• Solid-state potentiometer • 3-wire serial interface • Terminal voltage, 0 to +8V • 100 wip.
X9319 - Digitally Potentiometer
(Renesas)
X9319
Digitally Controlled Potentiometer (XDCP™)
The Intersil X9319 is a digitally controlled potentiometer (XDCP). The device consists of a resistor .
X930A - UNIVERSAL SERIAL BUS MICROCONTROLLER
(Intel Corporation)
ADVANCE INFORMATION
8x930Ax UNIVERSAL SERIAL BUS MICROCONTROLLER
s Complete Universal Serial Bus Specification 1.0 Compatibility — Supports Isochrono.