ML145040 Datasheet - LANSDALE Semiconductor

ML145040 8-Bit A/D Converters

DIGITAL INPUTS AND OUTPUTS CS (Pin 15) Active *low chip select input. CS provides three *state control of Dout. CS at a high logic level forces Dout to a high *impedance state. IN addition, the device recognizes the falling edge of CS as a serial interface reset to provide syn.

www.DataSheet4U.com ML145040 ML145041 8-Bit A/D Converters With Serial Interface Silicon-Gate CMOS SEMICONDUCTOR TECHNICAL DATA Legacy Device: Motorola MC145040, MC145041 The ML145040 and ML145041 are low-cost 8-bit A/D Converters with serial interface ports to provide communication with microprocessors and microcomputers. The converters operate from a single power supply with a maximum nonlinearity of ± 1/2 LSB over the full temperature range. No external trimming is required. The ML145040 al.

ML145040 Features

* a break

* before

* make switching structure to minimize noise injection into the analog inputs. The source impedance driving these inputs must be ≤ 10 kΩ. NOTE: $B addresses an on

* chip test voltage of (Vref + VAG)/2, and produces an output of $80 if the converter is functioning p

ML145040 Datasheet (443.58 KB)