Datasheet4U Logo Datasheet4U.com

MCS1802 - Linear Hall-Effect Current Sensor

Datasheet Summary

Description

The MCS1802 is a linear Hall-effect current sensor for AC or DC current sensing.

The Hall array is differential, which cancels out any stray magnetic field.

A primary conductor with a low resistance allows current to flow close to the IC, which contains high-accuracy Hall-effect sensors.

Features

  • 3.3V Single Supply.
  • Immune to External Magnetic Fields by Differential Sensing.
  • 2.2kVRMS Minimum Isolation Voltage.
  • Operating Temperature: -40°C to +125°C.
  • 0.9mΩ Internal Conductor Resistance.
  • ±5A to ±50A Bi-directional Range.
  • Adjustable Bandwidth up to 100kHz.
  • 4μs Output Rising Time.
  • Ratiometric Output from Supply Voltage.
  • Output Proportional to AC or DC Currents.
  • Factory-Trimmed for Accuracy.

📥 Download Datasheet

Datasheet preview – MCS1802

Datasheet Details

Part number MCS1802
Manufacturer MPS
File Size 553.78 KB
Description Linear Hall-Effect Current Sensor
Datasheet download datasheet MCS1802 Datasheet
Additional preview pages of the MCS1802 datasheet.

📁 Similar Datasheet

  • MCS-100-02 - Wi-Fi Antenna (Gemicom)
  • MCS-51 - (MCS-51/-96) Packaging Information (Intel Corporation)
  • MCS-96 - (MCS-51/-96) Packaging Information (Intel Corporation)
  • MCS0402 - Professional Thin Film Chip Resistors (Vishay)
  • MCS0402 - (MCS0402 - MCS0805) Professional flat chip resistors (BC)
  • MCS0402AT - High Stability Thin Film Flat Chip Resistors (Vishay)
  • MCS0603 - (MCS0402 - MCS0805) Professional flat chip resistors (BC)
  • MCS0805 - (MCS0402 - MCS0805) Professional flat chip resistors (BC)
  • MCS21 - PHOTON COUPLED ISOLATOR (ETC)
  • MCS2400 - PHOTON COUPLED ISOLATOR Ga As INFRARED EMITTING DIODE AND LIGHT ACTIVATED SCR (ISOCOM)
Other Datasheets by MPS

    Full PDF Text Transcription

    Click to expand full text
    MCS1802 3.3V, Linear Hall-Effect Current Sensor with ±2.5% Accuracy Over Temperature DESCRIPTION The MCS1802 is a linear Hall-effect current sensor for AC or DC current sensing. The Hall array is differential, which cancels out any stray magnetic field. A primary conductor with a low resistance allows current to flow close to the IC, which contains high-accuracy Hall-effect sensors. This current generates a magnetic field that is sensed at two different points by the integrated Hall-effect transducers. The magnetic field difference between these two points is then converted into a voltage that is proportional to the applied current. A spinning current technique is used for a low and stable offset.
    Published: |