Datasheet4U Logo Datasheet4U.com

MT7844D - Non-isolated APFC BUCK LED Driver

Description

The MT7844D is a high-PF, non-isolate LED Driver IC.

The floating-ground, high-side BUCK topology makes full wave detection possible.

High precision output current is achieved.

Features

  • Single-stage active power factor correction (PFC > 0.90).
  • Ultra-high voltage power supply without start-up resistor and power supply diode.
  • High accurate LED current (±3%).
  • Good Line and Load Re.

📥 Download Datasheet

Datasheet preview – MT7844D

Datasheet Details

Part number MT7844D
Manufacturer Maxic Technology
File Size 208.86 KB
Description Non-isolated APFC BUCK LED Driver
Datasheet download datasheet MT7844D Datasheet
Additional preview pages of the MT7844D datasheet.

📁 Similar Datasheet

  • MT70003 - SINGLE CHANNEL ARINC DECODER (Aeroflex Circuit Technology)
  • MT70014 - TWO CHANNEL ARINC TRANSMITTER (Aeroflex Circuit Technology)
  • MT705 - Load Cell (Millennium Mechatronics)
  • MT7103 - (MT7103 - MT7403) 3mm Ultra Bright Red LED (Marktech)
  • MT7183A-UR - 3mm 25 Ultrabright Red LED (Marktech Corporate)
  • MT7203 - (MT7103 - MT7403) 3mm Ultra Bright Red LED (Marktech)
  • MT72038 - FOUR CHANNEL ARINC 429 LINE RECEIVER (Aeroflex Circuit Technology)
  • MT72HTS1G72FZ - DDR2 SDRAM FBDIMM (Micron)
  • MT72HVQ1G72PY-53E - DDR2 SDRAM VLP RDIMM (Micron Technology)
  • MT72HVQ1G72PY-667 - DDR2 SDRAM VLP RDIMM (Micron Technology)
Other Datasheets by Maxic Technology
  • MT7844 - Non-isolated APFC BUCK LED Driver
  • MT7844S - Non-isolated APFC BUCK LED Driver
  • MT7842 - Non-isolated APFC BUCK LED Driver
  • MT7845 - Non-isolated APFC BUCK LED Driver
  • MT7810 - High Efficiency High Precision Buck Constant Current Driver
  • MT7811B - High Efficiency High Precision Buck Constant Current Driver
  • MT7812 - High Efficiency High Precision Buck Constant Current Driver
  • MT7812B - High Efficiency High Precision Buck Constant Current Driver

Full PDF Text Transcription

Click to expand full text
Maximizing IC Performance MT7844D Non-isolated APFC BUCK LED Driver DESCRIPTION The MT7844D is a high-PF, non-isolate LED Driver IC. The floating-ground, high-side BUCK topology makes full wave detection possible. High precision output current is achieved. MT7844D works in Quasi-Resonant Mode (QRM), which improves both of efficiency and EMI performance. The system integrates the ultra-high voltage power supply circuit, the start-up resistor and power supply diode are not needed. Low external component count and cost is achieved. Various protections such as over voltage protection (OVP), over current protection (OCP) and over temperature compensation, etc. are embedded to improve reliability. The MT7844D integrates 550V MOSFET, which further simplifies external circuit.
Published: |