Datasheet4U Logo Datasheet4U.com

MAX6965 - 9-Output LED Driver

Description

The MAX6965 I2C™-compatible serial interfaced peripheral provides microprocessors with nine additional output ports.

Each output is an open-drain current-sinking output rated to 50mA at 7V.

All outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup up to 7V.

Features

  • 400kbps, 2-Wire Serial Interface, 5.5V Tolerant.
  • 2V to 3.6V Operation.
  • Overall 8-Bit PWM LED Intensity Control Global 16-Step Intensity Control Plus Individual 16-Step Intensity Controls.
  • Two-Phase LED Blinking.
  • High Port Output Current.
  • Each Port 50mA (max).
  • RST Input Clears Serial Interface and Restores Power-Up Default State.
  • Supports Hot Insertion.
  • Outputs are 7V-Rated Open Drain.
  • Low Standby Current (1.

📥 Download Datasheet

Datasheet preview – MAX6965

📁 Similar Datasheet

  • MAX696 - Microprocessor Supervisory Circuits (Maxim)
  • MAX6964 - 17-Output LED Driver/GPO (Maxim)
  • MAX6964ATG - 17-Output LED Driver/GPO (Maxim Integrated)
  • MAX6966 - 10-Port Constant-Current LED Drivers and I/O Expanders (Maxim Integrated)
  • MAX6967 - 10-Port Constant-Current LED Drivers and I/O Expanders (Maxim Integrated)
  • MAX690 - Microprocessor Supervisory (Maxim)
  • MAX6900 - I2C-Compatible RTC (Maxim)
  • MAX6901 - I2C-Compatible RTC (Maxim)
  • MAX6902 - I2C-Compatible RTC (Maxim)
  • MAX690A - Microprocessor Supervisory Circuits (Maxim)
Other Datasheets by Maxim Integrated Products
  • MAX6960 - 4-Wire Serially Interfaced 8 x 8 Matrix Graphic LED Drivers
  • MAX6961 - 4-Wire Serially Interfaced 8 x 8 Matrix Graphic LED Drivers
  • MAX6962 - 4-Wire Serially Interfaced 8 x 8 Matrix Graphic LED Drivers
  • MAX6963 - 4-Wire Serially Interfaced 8 x 8 Matrix Graphic LED Drivers
  • MAX6920 - Serial-Interfaced VFD Tube Driver
  • MAX6921 - (MAX6921 / MAX6931) Serial-Interfaced VFD Tube Drivers
  • MAX6922 - Serial-Interfaced VFD Tube Drivers
  • MAX692A - Microprocessor Supervisory Circuits

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com 19-3058; Rev 3; 3/05 9-Output LED Driver with Intensity Control and Hot-Insertion Protection General Description The MAX6965 I2C™-compatible serial interfaced peripheral provides microprocessors with nine additional output ports. Each output is an open-drain current-sinking output rated to 50mA at 7V. All outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup up to 7V. Eight-bit PWM current control is also integrated. Four of the bits are global control and apply to all LED outputs to provide coarse adjustment of current from fully off to fully on with 14 intensity steps. Additionally each output then has an individual 4-bit control, which further divides the globally set current into 16 more steps.
Published: |