LM75 Datasheet PDF - Maxim Integrated Digital Temperature Sensor and Thermal Watchdog Specs

LM75 - Digital Temperature Sensor and Thermal Watchdog

Datasheet Summary

Description

The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector.

The host can query the LM75 through its I2C interface to read temperature at any time.

Features

SO (SOP) and µMAX® (µSOP) Packages.
I2C Bus Interface.
Separate Open-Drain OS Output Operates as Interrupt or Comparator/Thermostat Input.
Register Readback Capability.
Power-Up Defaults Permit Stand-Alone Operation as a Thermostat.
3.0V to 5.5V Supply Voltage.
Low Operating Supply Current 250µA (typ), 1mA (max).
4µA (typ) Shutdown Mode Minimizes Power Consumption.
Up to Eight LM75s Can Be Connected to a Single Bus.

Datasheet Details

Part number	LM75
Manufacturer	Maxim Integrated
File Size	701.97 KB
Description	Digital Temperature Sensor and Thermal Watchdog
Datasheet	LM75 Datasheet
Additional preview pages of the LM75 datasheet.

📁 Similar Datasheet

LM75 - Digital Temperature Sensor and Thermal WATCHDOG (National Semiconductor)

LM75 - Digital Temperature Sensor and Thermal Watchdog (Analog Devices)

LM75107A - dual line receivers (National Semiconductor)

LM75108A - dual line receivers (National Semiconductor)

LM75109 - dual line drivers (National Semiconductor)

LM75110 - dual line drivers (National Semiconductor)

LM75121 - dual line drivers (National Semiconductor)

LM75122 - triple line receivers (National Semiconductor)

LM75123 - dual line driver (National Semiconductor)

LM75124 - triple line receivers (National Semiconductor)

Full PDF Text Transcription

Click to expand full text

19-4385; Rev 0; 3/09 LM75 Digital Temperature Sensor and Thermal Watchdog with 2-Wire Interface General Description The LM75 temperature sensor includes a delta-sigma analog-to-digital converter, and a digital overtemperature detector. The host can query the LM75 through its I2C interface to read temperature at any time. The open-drain overtemperature output (OS) sinks current when the programmable temperature limit is exceeded. The OS output operates in either of two modes, comparator or interrupt. The host controls the temperature at which the alarm is asserted (TOS) and the hysteresis temperature below which the alarm condition is not valid (THYST). Also, the LM75’s TOS and THYST registers can be read by the host.

Published: Mar 27, 2020 |