MAX5911

-48V Simple Swapper Hot-Swap Switches

Maxim

MAX5911 Features

* that prevent damage to the internal FET. They include an enable input, which responds to positive logic signals (+3.3V or +5V), allowing the host system to disconnect the load. ENABLE is also used to reset the device after a latching fault condition occurs. The MAX5911/MAX5912 Simple Swapper™ hot-sw

MAX5911 General Description

The MAX5911/MAX5912 are fully integrated hot-swap switches for negative supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing problematic glitches on the negative power-supply rail. They also monitor various circuit parameters.

MAX5911 Datasheet (417.48 KB)

MAX5911 Datasheet Preview — Preview of MAX5911 PDF

Datasheet Details

Part number:

MAX5911

Manufacturer:

Maxim

File Size:

417.48 KB

Description:

-48v simple swapper hot-swap switches.

📁 Related Datasheet

MAX5910 +65V Simple Swapper Hot-Swap Switches (Maxim)

MAX5912 -48V Simple Swapper Hot-Swap Switches (Maxim Integrated)

MAX5913 +48V Quad Hot-Swap Controllers (Maxim)

MAX5913A +48V Quad Hot-Swap Controllers (Maxim Integrated Products)

MAX5914 +48V Quad Hot-Swap Controllers (Maxim Integrated)

MAX5914A +48V Quad Hot-Swap Controllers (Maxim Integrated Products)

MAX5915 Dual PCI 2.2 Hot-Swap Controllers (Maxim)

MAX5915A Dual PCI 2.2 Hot-Swap Controllers (Maxim Integrated)

MAX5916 Dual PCI 2.2 Hot-Swap Controllers (Maxim Integrated)

MAX5916A Dual PCI 2.2 Hot-Swap Controllers (Maxim Integrated)

TAGS

MAX5911 -48V Simple Swapper Hot-Swap Switches Maxim

Image Gallery

MAX5911 Features

MAX5911 General Description

Datasheet Details

File Size:

Description:

MAX5911 Distributor