Datasheet4U Logo Datasheet4U.com

MIC1344 - Power ORing Switch

Description

The MIC1344 is an advanced two input, one output, hot swappable, power multiplexer.

It has both automatic and manual input selection (ENA and ENB) and four status outputs.

In automatic mode, the MIC1344 will automatically connect the higher of two input voltages (INA or INB), to the output (OUT).

📥 Download Datasheet

Datasheet Details

Part number MIC1344
Manufacturer Micrel Semiconductor
File Size 1.57 MB
Description Power ORing Switch
Datasheet download datasheet MIC1344 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MIC1555 IttyBitty RC Timer/Oscillator Microchip
MIC1557 IttyBitty RC Timer/Oscillator Microchip
MIC184 Local/Remote Thermal Supervisor Microchip
MIC2003 Fixed and Adjustable Current Limiting Power Distribution Switches Microchip
MIC2004 Fixed Current Limit Power Distribution Switch Micrel

Other Datasheets by Micrel Semiconductor

Part Number Description
MIC10937 V. F. Alphanumeric Display Controller
MIC10938 (MIC10938 / MIC10939) V. F. Dot Matrix Display Controller
MIC10939 V. F. Dot Matrix Display Controller
MIC10942 V. F. Dot Matrix Display Controller
MIC10943 V. F. Dot Matrix Display Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MIC1344 Smart, 3A, Two-Channel, Power ORing Switch General Description The MIC1344 is an advanced two input, one output, hot swappable, power multiplexer. It has both automatic and manual input selection (ENA and ENB) and four status outputs. In automatic mode, the MIC1344 will automatically connect the higher of two input voltages (INA or INB), to the output (OUT). In manual mode, either of the two inputs can be routed to the output, or both power inputs can be turned off so that multiple MIC1344’s can be used for more than two power inputs. The MIC1344 has four digital open drain status outputs. The ASEL and BSEL outputs indicate which input is selected. The STAOK and STBOK outputs indicate the general health of the input channels.
Published: |