LX5242
feature of the LX5241/42/43 is the master / slave function. Driving this pin high or floating the pin enables the 1.3V DIFFSENSE reference. Driving the pin low disables the on board DIFFSENSE reference and enables use of an external master reference device.
Auto-Selectable LVD or Single Ended Termination 3.0p F Maximum Disabled Output Capacitance Fast Response, No External Capacitors Required patible with Active Negation Drivers 15µA Supply Current in Disconnect Mode Logic mand Disconnects All Termination Lines Diffsense Line Driver Ground Driver Integrated for Single-Ended Operation Current Limit and Thermal Protection Hot-Swap patible (Single Ended) Ultra160 pliant See LX5245/5246 for LVD Termination Only Pin patible With DS2119 and UCC5630
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://.microsemi.
BUS VOLTAGE 6
V(+) VCM
VOD = V(-)
- V(+), Logic = 0 NEGATED
100m V 0V -100m V
V(-)
- -
LX...
