SMDA03C-8 Datasheet | Microsemi

8700 E. Thomas Road Scottsdale, AZ 85251 Tel: (480) 941-6300 Fax: (480) 947-1503 SMDA03C-8 thru SMDA24C-8 TVSarray™ Series DESCRIPTION (300 watt) This 14 pin 8 line Bi-directional array is designed for use in applications where protection is required at the board level from voltage transients caused by electrostatic discharge (ESD) as defined in IEC 1000-4-2, electrical fast transients (EFT) per IEC 1000-4-4 and effects of secondary lighting. These TRANSIENT VOLTAGE SUPPRESSOR (TVS) Diode Arrays have a peak power of 300 watts for an 8/20 µsec pulse and are designed to protect 3.0/3.3 volt ponents such as DRAM’s, SRAM’s, CMOS, HCMOS, HSIC, and low voltage interfaces up to 24 volts. Features - - - - Protects 3.0/3.3 up through 24V ponents Protects 8 lines Bi-directional Provides electrically isolated protection SO-14 Packaging MECHANICAL - - - - - Molded SO-14 Surface Mount Weight: 0.127 grams (approximate) Body Marked with Logo, and device number Pin #1 defined by DOT on top of package Encapsulation meets UL 94V-0 MAXIMUM RATINGS - - - - Operating Temperatures: -550 C to +1500 C Storage Temperature: -550 C to +1500 C Peak Pulse Power: 300 Watts (8/20 µ sec, Figure 1) Pulse Repetition Rate: <.01% PACKAGING - - - Tape & Reel EIA Standard 481-1-A 13 inch reel 2,500 (OPTIONAL) Carrier tubes 55 pcs per (STANDARD) ELECTRICAL CHARACTERISTICS@ 250C Unless otherwise specified STAND OFF VOLTAG E VWM VOLTS MAX SMDA03C-8 SMDA05C-8 SMDA12C-8 SMDA15C-8 SMDA24C-8 SDL8 SDB8 SDD8 SDF8 SDH8 3.3 5.0 12.0 15.0 24.0 BREAKDOWN VOLTAGE VBR @1 m A VOLTS MIN 4 6.0 13.3 16.7 26.7 CLAMPING VOLTAGE VC @ 1 Amp (FIGURE 2) VOLTS MAX 7.0 9.8 19.0 24.0 43.0 CLAMPING VOLTAGE VC @ 5 Amp (FIGURE 2) VOLTS MAX 9.0 11 24 30 55 LEAKAGE CURRENT ID @ VWM µA MAX 200 40 1 1 1 CAPACITANCE (f=1 MHz) @0V C p F TYP 300 200 75 50 35 TEMPERATURE COEFFICIENT OF VBR áVBR m V/°C MAX -5 1 8 11 28 PART NUMBER DEVICE MARKING NOTE: Transient Voltage Suppression (TVS) product is normally selected based on...