SM-BF50, SM-BF50_Mini Datasheet (Mini-Circuits)

SM-BF50, SM-BF50_Mini, 50OHM DC to 2 GHz

Serial Clock (SCL) The SCL input is used to clock data into the device on the rising edge and to clock data out of the device on the falling edge.

Serial Data (SDA) SDA is a bidirectional pin used to transfer addresses, data or control information into the device or to transfer data out of the devic

Standard EEPROM ICs SLx 24C64 64 Kbit (8192 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus Data Sheet Preliminary 1998-07-27 SLx 24C64 Revision History: Previous Version: Page Page (in previous (in current Version) Version) 3 11, 12 21 24 24 I2C Bus Current Version: Preliminary 1998-07-27 05.98 Subjects (major changes since last revision) 3 11, 13 21 24 24 Text was changed to “Typical programming time 5 ms for up to 32 bytes”.

The erase/write cycle is finished latest after 10 8

SM-BF50 Features

* Data EEPROM internally organized as 8192 bytes and 256 pages × 32 bytes

* Page Protection Mode for protecting the EEPROM against unintended data changes (SLx 24C64/P types only)

* Low power CMOS

* VCC = 2.7 to 5.5 V operation

* Two wire serial interface bus,