SP8861HP - 13GHz Low Power Single-Chip Frequency Synthesiser

Mitel Networks

📥 Download Datasheet

SP8861HP Datasheet Preview — Preview of SP8861HP PDF

Datasheet Details

Part number	SP8861HP
Manufacturer	Mitel Networks
File Size	200.62 KB
Description	13GHz Low Power Single-Chip Frequency Synthesiser
Datasheet	SP8861HP_MitelNetworksCorporation.pdf

SP8861HP Product details

Description

Prescaler and AM Counter The programmable divider chain is of AM counter design and therefore contains a dual modulus front end prescaler, an A counter which controls the dual modulus ratio and an M counter which controls the bulk multi-modulus division.A programmable divider of this type has a division ratio of MN1A and a minimum integer steppable division ratio of N(N21).In the SP8861, the dual modulus front end prescaler is a dual N ratio device, capable of being statically switched between

Features

s Improved Digital Phase Detector Eliminates ‘Dead Band’ Effects s Low Operating Power, Typically 175mW s 1.
3GHz Operating Frequency s Complete Phase Locked Loop s High Input Sensitivity s Programmed throughThree-Wire Bus s Wide Range of Reference Division Ratios s Local Storage for Two Frequency Words, giving Rapid Frequency Toggling s Programmable Phase Detector Gain s Power Down Mode.

📁 SP8861HP Similar Datasheet

SP886 - DECT RF Filters (SIPAT)
SP8803 - Modulus Divider (Zarlink Semiconductor)
SP8808 - Modulus Divider (Zarlink Semiconductor)
SP880S - 8.0AMP Schottky Barrier Rectifiers (SeCoS)
SP88201 - RF SAW Filter (CETC)
SP8830 - 1.5GHz / 10 Prescaler (Zarlink Semiconductor)
SP8848 - Cord (ETC)
SP8852D - 1.7GHz PARALLEL LOAD PROFESSIONAL SYNTHESISER (Zarlink Semiconductor)

Other Datasheets by Mitel Networks

SP8861 - 13GHz Low Power Single-Chip Frequency Synthesiser
SP8861NAHP - 13GHz Low Power Single-Chip Frequency Synthesiser
SP8802 - 3.3GHz 2 fixed Modulus Divider
SP8802A - 3.3GHz 2 fixed Modulus Divider
SP8802ADG - 3.3GHz 2 fixed Modulus Divider
SP8804 - 3.3GHz 4 fixed Modulus Divider

Published: Jun 7, 2005 |