MM3112 - Protection for Lithium-Ion Batteries

Features

1. Overcharge detection voltage Selectable between 4.0~4.5V by 5mV steps Accuracy ±25mV 2. Overdischarge detection voltage Selectable between 2.0~3.0V by 100mV steps Accuracy ±80mV 3. No external capacitor for delay time required (delay time is set by the internal circuit) 4. Regulator output voltage Selectable between 2.0~4.0V by 0.2V steps.

Mitsumishi

Datasheet Details

Part number	MM3112
Manufacturer	Mitsumishi
File Size	309.57 KB
Description	Protection for Lithium-Ion Batteries
Datasheet	MM3112 Datasheet
Additional preview pages of the MM3112 datasheet.

📁 Similar Datasheet

MM3111 - Audio Power Amplifier (Mitsumi Electronics)
MM3114 - Protection for Lithium-Ion Batteries (Mitsumi)
MM3122A - 250mA CMOS regulator (MITSUMI)
MM3122B - 250mA CMOS regulator (MITSUMI)
MM3122C - 250mA CMOS regulator (MITSUMI)
MM3122D - 250mA CMOS regulator (MITSUMI)
MM3122E - 250mA CMOS regulator (MITSUMI)
MM3122F - 250mA CMOS regulator (MITSUMI)
MM3122G - 250mA CMOS regulator (MITSUMI)
MM3122H - 250mA CMOS regulator (MITSUMI)

Other Datasheets by Mitsumishi

Full PDF Text Transcription

Click to expand full text

MITSUMI Protection for Lithium-Ion Batteries (2-serial cells) MM3112 Series Protection for Lithium-Ion Batteries (2-serial cells) Monolithic IC MM3112 Series Phased Out Products Outline This IC integrates overcharge/overdischarge protection functions for lithium-ion/lithium polymer rechargeable batteries and the regulator functions into one chip by high voltage CMOS process. It can be used with other gas gauge IC, security IC, etc. as it includes a regulator. Overcharge/overdischarge can be detected to protect 2-cell lithium-ion/lithium polymer batteries. Charge/discharge control is perfomed using two external Pch MOS FETs. Features 1. Overcharge detection voltage Selectable between 4.0~4.5V by 5mV steps Accuracy ±25mV 2. Overdischarge detection voltage Selectable between 2.0~3.

Published: Apr 21, 2019 |