MC33886 Datasheet (Motorola)

MC33886, 5.0A H-BRIDGE

of each pin can be found in the Functional Pin Description section beginning on page 16.

Pin Number 1 Pin Name AGND Formal Name Analog Ground Definition Low-current analog signal ground.

2 FS Fault Status for H- Open drain active Low Fault Status output requiring a pull-up resistor to 5.0 V.

Freescale Semiconductor Technical Data Document Number: MC33886 Rev 10.0, 01/2014 5.0 A H-Bridge The 33886 is a monolithic H-Bridge ideal for fractional horsepower DC-motor and bi-directional thrust solenoid control.

The IC incorporates internal control logic, charge pump, gate drive, and low RDS(ON) MOSFET output circuitry.

The 33886 is able to control continuous inductive DC load currents up to 5.0 A.

Output loads can be pulse width modulated (PWM-ed) at frequencies up to 10 kHz.

A Fault St

MC33886 Features

* 5.0 V to 40 V continuous operation

* 120 m RDS(on) H-Bridge MOSFETs

* TTL /CMOS compatible Inputs

* PWM frequencies up to 10 kHz

* Active current limiting via internal constant off-time PWM (with temperature-dependent threshold reduction)

* Output s