Datasheet4U Logo Datasheet4U.com

MC3488A - DUAL EIA-423/EIA-232D DRIVER

Datasheet Summary

Features

  • t Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P. O. Box 20912; Phoenix, Arizona 85036. 1.
  • 800.
  • 441.
  • 2447 or 602.
  • 303.
  • 5454 MFAX: RMFAX0@email. sps. mot. com.

📥 Download Datasheet

Datasheet preview – MC3488A

Datasheet Details

Part number MC3488A
Manufacturer Motorola
File Size 105.11 KB
Description DUAL EIA-423/EIA-232D DRIVER
Datasheet download datasheet MC3488A Datasheet
Additional preview pages of the MC3488A datasheet.

📁 Similar Datasheet

  • MC3488A - Dual EIA-423/EIA-232D Line Driver (ON Semiconductor)
  • MC34825 - Micro-USB Interface (NXP)
  • MC34825EP - Micro-USB Interface (NXP)
  • MC34844 - 10 Channel LED Backlight Driver (NXP)
  • MC34845 - Low cost six channel led backlight driver (NXP)
  • MC3484S2-2 - (MC3484S2-2 / MC3484S4-2) Integrated Solenoid Driver (Motorola Semiconductor)
  • MC3484S4-2 - (MC3484S2-2 / MC3484S4-2) Integrated Solenoid Driver (Motorola Semiconductor)
  • MC3486 - Quadruple Differential Line Receiver (Texas Instruments)
  • MC3486N - Quadruple Differential Line Receiver (Texas Instruments)
  • MC3487 - Quadruple Differential Line Driver (Texas Instruments)
Other Datasheets by Motorola
  • MC3480 - Dynamic Memory Controller
  • MC3481 - (MC3485) QUAD SINGLE ENDED LINE DRIVER
  • MC3482A - OCTAL THREE-STATE BUFFER/LATCH
  • MC3482B - OCTAL THREE-STATE BUFFER/LATCH
  • MC3485 - (MC3481) QUAD SINGLE ENDED LINE DRIVER
  • MC3486 - QUAD EIA-422/3 LINE RECEIVER
  • MC3487 - QUAD EIA-422 LINE DRIVER
  • MC34001 - JFET INPUT OPERATIONAL AMPLIFIERS

Full PDF Text Transcription

Click to expand full text
Order this document by MC3488A/D Dual EIA-423/EIA-232D Line Driver The MC3488A dual is single–ended line driver has been designed to satisfy the requirements of EIA standards EIA–423 and EIA–232D, as well as CCITT X.26, X.28 and Federal Standard FIDS1030. It is suitable for use where signal wave shaping is desired and the output load resistance is greater than 450 ohms. Output slew rates are adjustable from 1.0 µs to 100 µs by a single external resistor. Output level and slew rate are insensitive to power supply variations. Input undershoot diodes limit transients below ground and output current limiting is provided in both output states. The MC3488A has a standard 1.5 V input logic threshold for TTL or NMOS compatibility.
Published: |