PDIUSBP11APW Datasheet | NXP Semiconductors

FEATURES - plies with Universal Serial Bus specification 1.1 - Utilizes digital inputs and outputs to transmit and receive USB cable data DESCRIPTION The PDIUSBP11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The pinout conforms with the ”Serial Interface Engine”. Implementation of the Serial Interface Engine along with the USB transceiver allows the designer to make USB patible devices with off-the-shelf logic and easily modify and update the application. The PDIUSBP11A is backward patible to the PDIUSBP11 and allows for single-ended data interfacing. - Supports 12Mbit/s “Full Speed” and 1.5Mbit/s “Low Speed” serial data transmission - patible with the VHDL “Serial Interface Engine” from USB Implementers’ Forum - Supports single-ended data interface - Single 3.3V supply - Available in SO-14, SSOP-14 and TSSOP-14 packages ORDERING INFORMATION PACKAGES 14-pin plastic SO 14-pin plastic SSOP 14-pin plastic TSSOP TEMPERATURE RANGE - 40°C to +85°C - 40°C to +85°C - 40°C to +85°C OUTSIDE NORTH AMERICA PDIUSBP11A D PDIUSBP11A DB PDIUSBP11APW NORTH AMERICA PDIUSBP11A D PDIUSBP11A DB PDUSBP11APW DH PKG. DWG. # SOT108-1 SOT337-1 SOT402-1 PIN CONFIGURATION MODE OE# RCV VP VM SUSPND GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VCC VMO/FSEO VPO D) D- SPEED NC FUNCTIONAL DIAGRAM OE# SPEED VMO/FSEO VPO D- D+ + - VP SV00559 SV00560 1999 Jun 04 853-2008 21712 Philips Semiconductors Product specification Universal Serial Bus transceiver PDIUSBP11A PIN DESCRIPTION PIN No. 3 2 PIN SYMBOL RCV OE# I/O O I NAME AND FUNCTION Receive data. CMOS level output for USB differential input Output Enable. Active LOW, enables the transceiver to transmit data on the bus. When not active the transceiver is in receive mode Mode....