SC18IS602B - I2C-bus to SPI bridge

NXP

Datasheet Details

The SC18IS602B is designed to serve as an interface between a standard I2C-bus of a microcontroller and an SPI bus.

I2C-bus slave interface operating up to 400 kHz.
SPI master operating up to 1.8 Mbit/s.
200-byte data buffer.
Up to four slave select outputs.
Up to four programmable I/O pins.
Operating supply voltage: 2.4 V to 3.6 V.
Low power mode.
Internal oscillator option.
Active LOW interrupt output.
ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115, and 1000 V CDM per JESD22-C101.
Latch-up testing is done to JEDEC Standard.

📁 SC18IS602B Similar Datasheet

SC18IS602 - I2C-bus to SPI bridge (NXP Semiconductors)
SC18IS603 - I2C-bus to SPI bridge (NXP Semiconductors)
SC183C - 2A Synchronous Step-Down Regulator (Semtech)
SC185 - 4A Synchronous Step-Down Regulator (Semtech)
SC186 - 4A Synchronous Step-Down Regulator (Semtech)
SC1869 - Adaptive RF Power Amplifier Linearizer (Maxim Integrated)
SC187 - 2.2MHz Synchronous Step-Down Regulator (Semtech)
SC1889 - Adaptive RF Power Amplifier Linearizer and Dual RMS Power Measurement (Maxim Integrated)

Other Datasheets by NXP

SC18IS600 - SPI to I2C-bus interface
SC18IS601 - SPI to IC-bus interface
SC18IM700 - Master I-2C - bus controller
SC16C2550 - Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder
SC16C2550B - dual UART
SC16C2552 - Dual UART with 16-byte transmit and receive FIFOs

Published: Jul 16, 2020 |