LM2642 - Two-Phase Synchronous Step-Down Switching Controller

National Semiconductor

Datasheet Details

The LM2642 consists of two current mode synchronous buck regulator controllers with a switching frequency of 300kHz. maximum

analog soft-start circuitry that is independent of the output load and output capacitance. This makes the soft-start behavior more predictable and controllable than traditional soft-start circuits. A PGOOD1 pin is provided to monitor the dc output of channel 1. Over-voltage protection is available for both outputs. A UV-Delay pin is also available to allow delayed shut off time for the IC during an output under-voltage event. Features n n n n n n n n n n n n n n n n Two synchronous buck regulat.

📁 LM2642 Similar Datasheet

LM26420 - High-Efficiency Synchronous DC/DC Converter (Texas Instruments)
LM26420-Q1 - High-Efficiency Synchronous DC/DC Converter (Texas Instruments)
LM26400Y - 500-kHz Wide Input Range Buck Regulator (Texas Instruments)
LM26480 - 1.5-A Buck Regulators and Dual 300-mA LDO (Texas Instruments)
LM26480-Q1 - 1.5-A Buck Regulators and Dual 300-mA LDO (Texas Instruments)
LM26484 - Power Management Unit (Texas Instruments)
LM26001 - 1.5-A Switching Regulator (Texas Instruments)
LM26001-Q1 - 1.5-A Switching Regulator (Texas Instruments)

Other Datasheets by National Semiconductor

Published: Mar 22, 2005 |