Datasheet4U Logo Datasheet4U.com

MM5504 - 6-Channel MOS Multiplex Switches

Description

silicon chip using low threshold P-channel MOS process.

by a diode circuit.

Features

  • Typical low "on" resistance Typical low "off" leakage Typical large analog voltage range Zero inherent offset voltage Normally off with zero gate voltage 150S2 100 pA ±10V The AM2009/AM2009C/MM4504/MM5504 are de- signed for.

📥 Download Datasheet

Datasheet preview – MM5504

📁 Similar Datasheet

  • MM551H - High Reliability High Voltage Analog Switch (General Electric Solid State)
  • MM5005 - Bipolar PNP Device (Seme LAB)
  • MM5005 - (MM5005 - MM5007) Audio Transistor (Motorola Semiconductor)
  • MM5006 - Bipolar PNP Device (Seme LAB)
  • MM5006 - (MM5005 - MM5007) Audio Transistor (Motorola Semiconductor)
  • MM5007 - Bipolar PNP Device (Semelab Plc)
  • MM5007 - (MM5005 - MM5007) Audio Transistor (Motorola Semiconductor)
  • MM5034 - MM5034 MM5035 Octal 80-Bit Static Shift Register (Rev. A) (ETCTI)
  • MM5034 - Octal 80-Bit Static Shift Register (National)
  • MM5035 - MM5034 MM5035 Octal 80-Bit Static Shift Register (Rev. A) (ETCTI)
Other Datasheets by National Semiconductor
  • MM550 - MOS analog switches
  • MM551 - MOS analog switches
  • MM552 - MOS analog switches
  • MM554 - four-channel commutator
  • MM555 - MOS analog switches
  • MM5554 - Frequency Divider
  • MM5555 - (MM5555 / MM5556) Chromatic Frequency Generators
  • MM5556 - Chromatic Frequency Generators

Full PDF Text Transcription

Click to expand full text
a AM2009/AM2009C, MM4504/MM5504 6-Channel MOS Multiplex Switches General Description The AM2009/AM2009C/MM4504/MM5504 are six channel multiplex switches constructed on a single silicon chip using low threshold P-channel MOS process. The gate of each MOS device is protected by a diode circuit. Features Typical low "on" resistance Typical low "off" leakage Typical large analog voltage range Zero inherent offset voltage Normally off with zero gate voltage 150S2 100 pA ±10V The AM2009/AM2009C/MM4504/MM5504 are de- signed for applications such as time division multiplexing of analog or digital signals. Switching speeds are primarly determined by conditions external to the device such as signal source impedance, capacitive loading and the total number of channels used in parallel.
Published: |