DAP008 - PWM Current-Mode Controller

ON Semiconductor

Datasheet Details

Pin No.

two efficient protective circuitries: 1. In presence of an overcurrent condition, the output pulses are disabled and the device enters a safe burst mode, trying to restart. Once the default has gone, the device auto.
recovers. 2. If an external signal (e. g. a temperature sensor) pulls the Adj pin above 3.2 V, the output pulses are immediately stopped and the DAP008 stays latched in this position. Reset occurs when the VCC collapses to ground, e. g. the user unplugs the power supply. Featur.

📁 DAP008 Similar Datasheet

DAP002 - PRIMARY CONTROLLER (STMicroelectronics)
DAP005 - Advanced transition-mode PFC controller (STMicroelectronics)
DAP00xx - Attenuators / Digital High Reliablity (Aeroflex)
DAP07 - CONNECTOR (Morethanall)
DAP08 - Connector (Morethanall)
DAP1023 - Thick Film Digital Attenuators / Diode or Relay Switched (Aeroflex)
DAP201 - Epitaxial Planar Silicon Diode Arrays (Rohm)
DAP202 - Switching Diode (MCC)

Other Datasheets by ON Semiconductor

Published: Jan 24, 2014 |