NLSX5002 Datasheet (ON Semiconductor)

NLSX5002, Translator

VCC VL GND VCC Input Voltage VL Input Voltage Ground EN Output Enable I/O VCCn I/O VLn I/O Port, Referenced to VCC I/O Port, Referenced to VL FUNCTION TABLE EN L H Operating Mode Hi *Z I/O Buses Connected www.onsemi.com 3 NLSX5002 MAXIMUM RATINGS Symbol Parameter Value Conditio

2-Bit 100 Mb/s Configurable Dual-Supply Level Translator NLSX5002 The NLSX5002 is a 2-bit configurable dual-supply autosensing bidirectional level translator that does not require a direction control pin.

The I/O VCC- and I/O VL-ports are designed to track two different power supply rails, VCC and VL respectively.

Both the VCC and the VL supply rails are configurable from 0.9 V to 4.5 V.

This allows a logic signal on the VL side to be translated to either a higher or a lower logic signal voltag

NLSX5002 Features

* Wide VCC, VL Operating Range: 0.9 V to 4.5 V

* VL and VCC are independent

* VL may be greater than, equal to, or less than VCC

* High

* Speed with 140 Mb/s Guaranteed Date Rate for VCC, VL > 1.8 V

* Low Bit

* to

* Bit Skew

* Overvol