AN7183 - Digital Video Encoder

Philips

Datasheet Details

The SAA7182; SAA7183 encodes digital YUV video data to an NTSC, PAL, SECAM CVBS or S-Video signal and also RGB.

CMOS 5 V device.
Digital PAL/NTSC/SECAM encoder.
System pixel frequency 13.5 MHz.
Accepts MPEG decoded data on 8-bit wide input port. Input data format Cb, Y, Cr etc. or Y and Cb, Cr on 16 lines (“CCIR 656”).
Three DACs for CVBS, Y and C operating at 27 MHz with 10-bit resolution.
Three DACs for RGB operating at 27 MHz with 9-bit resolution, RGB sync on CVBS and Y.
CVBS, Y, C and RGB output simultaneously.
Closed captioning.

📁 AN7183 Similar Datasheet

AN718 - Powering The Pentium Vre With The Si9145 Voltage Mode Controlled PWM Converter (Vishay Intertechnology)
AN7188K - Power Amplifier 18W (ETC)
AN7105 - Single Chip Stereo Pre Amplifier / Power Amplifier Circuit (Panasonic)
AN7106K - Single Chip Stereo Pre-Amplifier / Power Amplifier Circuit (Panasonic)
AN7108 - 1-Chip Stereo Pre-Amplifier / Power Amplifier Circuit (Matsushita Electric)
AN7109S - 2-Channel Recording / Playback Pre / Power Amplifier IC (Panasonic)
AN7110 - 1.2W Audio Power Amplifier (Panasonic Semiconductor)
AN7112 - 0.5W Audio Power Amplifier (Panasonic Semiconductor)

Other Datasheets by Philips

Published: Sep 7, 2005 |