Datasheet4U Logo Datasheet4U.com

BA6104 - LED Level Meter Driver

Datasheet Summary

Features

  • 3) The input level at which all LEDs light can be set in 1) Drives an LED bar display in proportion to the input DataSheet4U. com the range 0.5V to 3.0V using external resistors. level. 4) High input impedance. 2) The output current can be set to a maximum of 15mA 5) Easy-to-handle 9-pin SIP package. using external resistors, allowing free selection of the type and color of the LEDs. FBlock diagram DataSheet4U. com 621 DataSheet 4 U . com www. DataSheet4U. com Audio ICs FInternal circuit config.

📥 Download Datasheet

Datasheet preview – BA6104

Datasheet Details

Part number BA6104
Manufacturer ROHM Electronics
File Size 203.59 KB
Description LED Level Meter Driver
Datasheet download datasheet BA6104 Datasheet
Additional preview pages of the BA6104 datasheet.

📁 Similar Datasheet

  • BA6109 - Reversible motor driver (Rohm)
  • BA6110FS - Voltage controlled operational amplifier (Rohm)
  • BA612 - 5-channel high current driver (Rohm)
  • BA6122A - BA6122A / BA6122AF (Rohm)
  • BA6122AF - BA6122A / BA6122AF (Rohm)
  • BA6124 - LED level meter driver/ 5-point/ VU scale (Rohm)
  • BA6124F - LED level meter driver/ 5-point/ VU scale (Rohm)
  • BA6125 - LED level meter driver (Rohm)
  • BA6125 - 5-Point LED Linear Level Meter Driver (ETC)
  • BA6129AF - Reset IC with battery backup function (Rohm)
Other Datasheets by ROHM Electronics
  • BA6121 - 4-Output Switching Regulator
  • BA6334 - IC for 16 Operation Mode Detector
  • BA6805A - (BA6800AF / BA6805A) Flourescent Display Tube Level Meter Driver
  • BA6827FS - 2-phase motor driver

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Audio ICs LED level meter driver, 5-point, linear scale BA6104 The BA6104 is a monolithic driver IC for LED level meters applications. The IC has five comparators that operate in equally-spaced steps in response to the input voltage, and drive bar-display output LEDs. When the reference voltage generator is not set (pin 7 open), the comparators operate in 200mV (approx.) steps, so an input level of about 1V lights all of the LEDs. By connecting external resistors between pin 7 and GND. and pin 7 and VCC, this level can be adjusted over the range 0.5V to 3.0V. DataShee FApplications Signal meters, tuning meters and voltage checkers. FFeatures 3) The input level at which all LEDs light can be set in 1) Drives an LED bar display in proportion to the input DataSheet4U.
Published: |