STM32F756IG Datasheet | STMicroelectronics

Features - Core: ARM® 32-bit Cortex®-M7 CPU with FPU, adaptive real-time accelerator (ART Accelerator™) and L1 cache: 4KB data cache and 4KB instruction cache, allowing 0-wait state execution from embedded Flash memory and external memories, frequency up to 200 MHz, MPU, 428 DMIPS/2.14 DMIPS/MHz (Dhrystone 2.1), and DSP instructions. - Memories - Up to 1MB of Flash memory - SRAM: 320KB (including 64KB of data TCM RAM for critical real time data) + 16KB of instruction TCM RAM (for critical real time routines) + 4KB of backup SRAM (available in the lowest power modes) - Flexible external memory controller with up to 32-bit data bus: SRAM, PSRAM, SDRAM/LPSDR SDRAM, NOR/NAND memories - Dual mode Quad SPI - LCD parallel interface, 8080/6800 modes - LCD-TFT controller up to XGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D) - Clock, reset and supply management - 1.7 V to 3.6 V application supply and I/Os - POR, PDR, PVD and BOR - Dedicated USB power - 4-to-26 MHz crystal oscillator - Internal 16 MHz factory-trimmed RC (1% accuracy) - 32 k Hz oscillator for RTC with calibration - Internal 32 k Hz RC with calibration - Low power - Sleep, Stop and Standby modes - Vre Bg Ais Ttseurspp+ly4Kfo Br RTC, 32×32 bit backup SRAM backup - 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode - 2×12-bit D/A converters - General-purpose DMA: 16-stream DMA controller with FIFOs and burst support - Up to 18 timers: up to thirteen 16-bit (1x low power 16-bit timer available in stop mode) and two 32-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input. All 15 timers running up to 200 MHz. 2x watchdogs, Sys Tick timer &"'! LQFP100 (14 × 14 mm) LQFP144 (20 × 20 mm) UFBGA176 (10 x 10 mm) WLCSP143 LQFP176 (24 × 24 mm) LQFP208 (28 x 28 mm) TFBGA216 (13 x 13 mm) - Debug mode - SWD & JTAG interfaces - Cortex®-M7 Trace Macrocell™ - Up to 168 I/O ports...