Datasheet4U Logo Datasheet4U.com

KA2428 - TONE RINGER WITH BRIDGE DIODE

Features

  • Built-in full wave bridge diode rectifier.
  • Low current consumption, in order to allow the parallel operation of the 4 devices.
  • Few external components.
  • Tone and adjustable switching frequencies by external components.
  • High noise immunity due to built-in voltage to current hysteresis.
  • Adjustable activation voltage.
  • Internal zener diodes to protect against over voltages.
  • Adjustable ringer impedance with external components.

📥 Download Datasheet

Datasheet preview – KA2428

Datasheet Details

Part number KA2428
Manufacturer Samsung
File Size 38.81 KB
Description TONE RINGER WITH BRIDGE DIODE
Datasheet download datasheet KA2428 Datasheet
Additional preview pages of the KA2428 datasheet.

📁 Similar Datasheet

  • KA2402D - LOW VOLTAGE DC MOTOR SPEED CONTROLLER (ETC)
  • KA2410 - TELEPHONE TONE RINGERS (Wing Shing Computer Components)
  • KA2411 - TELEPHONE TONE RINGERS (Wing Shing Computer Components)
  • KA248 - Quad Operational Amplifier (Fairchild)
  • KA2002-BE10A - Compact Battery drivable thick film thermal printhead (Rohm)
  • KA2002-BE13A - ECR 2.7V Print Voltage (Rohm)
  • KA2003-BE10A - Compact Battery drivable thick film thermal printhead (Rohm)
  • KA2003-BE51A - ECR 2.7V Print Voltage (Rohm)
  • KA2004-BE10A - Compact Battery drivable thick film thermal printhead (Rohm)
  • KA2004-BE51A - ECR 2.7V Print Voltage (Rohm)
Other Datasheets by Samsung
  • KA2425A - SPEECH NETWORK WITH DIALER INTERFACE
  • KA2401 - DC MOTOR SPEED CONTROLLER
  • KA2402 - DC MOTOR SPEED CONTROLLER
  • KA2404 - DC MOTOR SPEED CONTROLLER
  • KA2404A - DC MOTOR SPEED CONTROLLER
  • KA2407 - DC MOTOR SPEED CONTROLLER
  • KA2410 - THE KA2410/KA2411 IS A BIPOLAR INTEGRATED CIRCUIT DESIGNED FOR TELEPHONE BELL REPLACEMENT
  • KA2411 - THE KA2410/KA2411 IS A BIPOLAR INTEGRATED CIRCUIT DESIGNED FOR TELEPHONE BELL REPLACEMENT

Full PDF Text Transcription

Click to expand full text
KA2418B/28 INTRODUCTION TONE RINGER WITH BRIDGE DIODE The KA2418B/28 is a monolithic integrated circuit telephone tone ringer with bridge diode, when coupled with an appropriate transducer, it replaces the electromechanical bell. This device is designed for use with either a piezo transducer or an inexpensive transformer coupled speaker to produce a pleasing tone composed of a high frequencys (fH1, fH2) alternating with a low frequency (fS) resulting in a warble frequency. The supply voltage is obtained from the AC ring signal and the circuit is designed so that noise on the line or variation of the ringing signal can not affect correct operation of the device.
Published: |