PC957L0YSZ0F Datasheet | Sharp Corporation

Description PC957L0NSZ0F Series contains a LED optically coupled to an OPIC chip. It is packaged in a 8 pin DIP, available in SMT gullwing lead-form option. Input-output isolation voltage(rms) is 5.0 k V, High speed response (TYP. 1Mb/s) and CMR is MIN. 15 k V/µs. - Agency approvals/pliance 1. Recognized by UL1577 (Double protection isolation), file No. E64380 (as model No. PC957L) 2. Approved by VDE, DIN EN60747-5-2 ( ∗ ) (as an option), file No. 40008898 (as model No. PC957L) 3. Package resin : UL flammability grade (94V-0) (∗) DIN EN60747-5-2 : successor standard of DIN VDE0884 - Features 1. 8 pin DIP package 2. Double transfer mold package (Ideal for Flow Soldering) 3. High speed response (t PHL : TYP. 0.2 µs, t PLH : TYP. 0.4 µs) 4. High noise immunity due to high instantaneous mon mode rejection voltage (CM H : MIN. 15 k V/µs, CML : MIN. - 15 k V/µs) 5. High isolation voltage between input and output (Viso(rms) : 5.0 k V) 6. Lead-free and Ro HS directive pliant - Applications 1. Programmable controllers 2. Inverter ∗ "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-processing circuit integrated onto a single chip. Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Sheet No.: D2-A06402EN Date Jun. 30. 2005 © SHARP Corporation PC957L0NSZ0F Series - Internal Connection Diagram 8 7 6 5 1 2 3 4 1 2 3 4 NC Anode Cathode NC 5 6 7 8 GND VO (Open collector) NC VCC - Outline Dimensions 1. Through-Hole [ex. PC957L0NSZ0F] 1.2±0.3 SHARP mark "S" 8 7 6 5 (Unit : mm) 2. Through-Hole (VDE option) [ex. PC957L0YSZ0F] 1.2±0.3 SHARP mark "S" 8 7 6 5 0.85±0.2 0.85±0.2 6.5±0.5 1 2...