TDA4605-3 - Control IC for Switched-Mode Power Supplies using MOS-Transistor

Product Overview

Siemens Semiconductor

Part number	TDA4605-3
Manufacturer	Siemens Semiconductor
File Size	557.18 KB
Description	Control IC for Switched-Mode Power Supplies using MOS-Transistor
Datasheet	TDA4605-3 Datasheet
Additional preview pages of the TDA4605-3 datasheet.

Application Circuit The application circuit shows a flyback converter for video recorders with an output power rating of 70 W.

q Fold-back characteristics provides overload protection for q q q q q q q q external components Burst operation under secondary short-circuit condition implemented Protection against open or a short of the control loop Switch-off if line voltage is too low (undervoltage switch-off) Line voltage depending compensation of fold-back point Soft-start for quiet start-up without noise generated by the transformer Chip-over temperature protection implemented (thermal shutdown) On-chip ringing suppres.

📁 Similar Datasheet

TDA4605 - CONTROL CIRCUIT FOR SWITCH MODE POWER SUPPLIES USING MOS TRANSISTORS (ST Microelectronics)
TDA4600 - Flyback CONVERTER Regulator Control Circuit (Motorola)
TDA4600-3 - CONTROL IC FOR SWITCHED - MODE POWER SUPPLIES (ETC)
TDA4650 - Multistandard colour decoder/ with negative colour difference output signals (NXP)
TDA4651 - Multistandard colour decoder with negative colour difference output signals (NXP)
TDA4655 - Generic multi-standard decoder (NXP)
TDA4657 - Generic multi-standard decoder (NXP)
TDA4660 - 64 us Baseband Delay Line (NXP)

Other Datasheets by Siemens Semiconductor

TDA4605-2 - Control IC for Switched-Mode Power Supplies using MOS-Transistors
TDA4601 - Control ICs for Switched-Mode Power Supplies
TDA4050B - Infrarot-Vorverstarker
TDA4210-3 - FM IF IC WITH SEARCH TUNING STOP PULSE/ FIELD STRENGTH INDICATOR/ MUTE SETTING AND MULTIPATH
TDA4320X - FM-IF with Counter Output/ Field Strength Indicator/ Noise Detector and MUTE Setting
TDA4340X - Stereo Decoder/Noise Blanker

Published: Apr 23, 2005 |