8 views

SLA24C32 Datasheet - Siemens

SLA24C32 32 Kbit (4096 x 8 bit) Serial CMOS-EEPROM

Serial Clock (SCL) The SCL input is used to clock data into the device on the rising edge and to clock data out of the device on the falling edge. Serial Data (SDA) SDA is a bidirectional pin used to transfer addresses, data or control information into the device or to transfer data out of the devic.

Standard EEPROM ICs SLx 24C32 32 Kbit (4096 × 8 bit) Serial CMOS-EEPROM with I2C Synchronous 2-Wire Bus Data Sheet Preliminary 1998-07-27 http://www.Datasheet4U.com/ SLx 24C32 Revision History: Previous Version: Page Page (in previous (in current Version) Version) 3 11, 12 21 24 24 I2C Bus Current Version: Preliminary 1998-07-27 02.98, 04.98 Subjects (major changes since last revision) 3 11, 13 21 24 24 Text was changed to “Typical programming time 5 ms for up to 32 bytes”. The erase/write.

SLA24C32 Features

* Data EEPROM internally organized as 4096 bytes and 128 pages × 32 bytes

* Page Protection Mode for protecting the EEPROM against unintended data changes (SLx 24C32/P types only)

* Low power CMOS

* VCC = 2.7 to 5.5 V operation

* Two wire serial interface bus,

SLA24C32 Datasheet (411.92 KB)