LM7824
Features
- -
- -
- - Output Voltage Range 5 to 24V Output current up to 1A No external ponents required Internal thermal overload protection Internal short-circuit current limiting Output transistor safe-area pensation
- Output voltage offered in 4% tolerance
TO-220M-1
Unit : (mm)
Standard Application Circuit
A mon ground is required between the input and the output voltages. The input voltage must remain typically 2.0V above the output voltage even during the low point on the Input ripple voltage. XX = these two digits of the type number indicate voltage.
- = Cin is required if regulator is located an appreciable distance from power supply filter.
- - = Co is not needed for stability; however, it does improve transient response.
Absolute Maximum Rating (Ta = 25o C unless otherwise noted)
Parameter
Input Voltage Output Current Power Dissipation Operating Junction Temperature Storage Temperature Range Thermal Resistance
- Junction to Case Thermal Resistance
- Junction to Ambient...
