TA7288P Datasheet - Toshiba Semiconductor

TA7288P DUAL BRIDGE DRIVER

GND terminal Output terminal Output terminal Input terminal Input terminal Input terminal Supply voltage terminal for Logic Supply voltage terminal for control Supply voltage terminal for Motor drive Output terminal TA7288P The input circuit uses active-high logic as shown below. The specified vol.

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA7288P TA7288P Sequential Dual-Bridge Driver (Driver for Switching between Forward and Reverse Rotation) for DC Motor The TA7288P is a bridge driver that is ideal for normal / reverse switching. This circuit offers four modes: normal rotation, reverse rotation, stop, and brake. The output current is 1.0 A (AVE.) and 2.0 A (PEAK). TA7288P has an ideal circuit configuration for VCR front tape loading and offers two types of power sup.

TA7288P Features

* z Wide range of operating voltage: VCC (opr.) = 4.5 to 18 V VS (opr.) = 0 to 18 V Vref (opr.) = 0 to 18 V No malfunction occurs even if VCC is higher than VS or vice versa. however, observe Vref ≤ VS. z Output current up to 1.0 A (AVE.) and 2.0 A (PEAK) z Built-in thermal shutdown circuit and overcu

TA7288P Datasheet (305.18 KB)