TA8233H Datasheet (Toshiba) - 30W BTL x 2CH AUDIO POWER AMPLIFIER

TA8233H, 30W BTL x 2CH AUDIO POWER AMPLIFIER

is made only on the single channel.) 1.

Voltage gain adjustment This IC has the amplifier constructions as shown in Fig.1.

The pre-amp (amp 1) is provided to the primary stage, and the input voltage is amplified by the flat amps, amp 3 and amp 4 of each channel through the phase amp (amp 2).

Since t

TA8233H Features

* due to the temperature rise at the high output can also be reduced. This stereo audio power IC, designed for car audio use, has two built

* in channels to reduce the characteristic difference between L and R channels. It also contains output short detection circuit, output clip detection and v