TB7101F Datasheet - Toshiba

TB7101F Buck DC-DC Converter

Pin No. 1 2 3 4 5 6 7 8 Symbol PGND VIN EN SGND N.C. N.C. VFB LX Description Ground for the output section Input pin This pin is placed in the standby state if VENB = low. Standby current is 1 μA or less. Enable pin This pin is connected to an on-chip CMOS inverter. When EN ≥ 3.5 V (@VIN = 5 V), .

TB7101F Features

* Enables up to 1 A of load current (IOUT) with a minimum of external components.

* Fixed output voltage: VOUT = 3.3 V (typ.) Weight: 0.017 g (typ.)

* A high 1-MHz oscillation frequency (typ.) allows the use of small external components.

* Uses only an inductor an

TB7101F-Toshiba.pdf