THNCF128MAA - Small Form Factor Card
The host is connected to the CompactFlash Storage Card or CF+ Card using a standard 50-pin connector.
The connector in the host consists of two rows of 25 male contacts each on 50 mil (1.27 mm) centers.
Pin Assignments and Pin Type The signal/pin assignments are listed in Table 4.
Low active signals
Preliminary version THNCFxxxMAA Series THNCFｘｘｘMAA Series CompactFlash™ Card OUTLINE The THNCF MAA series CompactFlash™ card is a flash technology based with ATA interface flash memory card.
It is constructed with flash disk controller chip and NAND-type （Toshiba） flash memory device.
The CompactFlash™ card operates in both 5-Volt and 3.3-Volt power supplies.
It comes in capacity of 8, 16, 32, 48, 64, 96, 128, 160, 192, 256, 320, 384 and up to 512 MB unformatted for type-
THNCF128MAA Features
* CompactFlash™ Compatibility Certified in accordance with the CompactFlash™ Certification Plan Substantially compatible with PC Card standard and PC Card ATA Support for CIS implemented with 256 bytes of attribute memory ATA/IDE interface ATA command set compatible Support for 8- or 16-bit host trans
