D602-1111 Datasheet | Tyco Electronics

.. - Reliable one-piece solder contacts - One-step installation - Termination for coax cables, shielded wires, twisted pairs, triaxial cables Solder Tacts Shielded contacts for MIL-C-38999, series I, II, - III, IV circular connectors - Size 16 only. One-piece controlled-soldering Solder Tacts contacts for MIL-C-38999 circular connectors are designed to terminate coaxial cables, shielded wires, and twisted pairs faster and more reliably than any other method. Solder Tacts contacts eliminate the variables associated with hard-to-handle crimping. Their one-step installation accelerates production while reducing handling and installed costs. Controlled soldering Solder Tacts contacts provide the optimum amount and type of solder and flux in Solder Tacts product construction prefluxed solder preforms to control soldering. The geometry of the coaxial cable is carried through the connector to eliminate separate pins, help reduce cross talk, and improve shielding effectiveness and signal transmission. Solder Tacts contacts provide simultaneous electrical connection and strain relief. Heat-shrinkable-tubing insulations eliminate stress concentration on the wire within the contact. Because the insulation is transparent and inspection windows are provided, terminations are fully inspectable. patibility The design versatility of Solder Tacts contacts makes them exceptionally well suited to military applications. Solder Tacts shielded contacts can be terminated with standard Raychem heating tools. Once terminated, they can be installed into connector cavities with standard insertion and extraction tools. They are replaceable without cutting and restripping or shortening the cable. Data Shee . Jacket (JOD) Shield (SOD) Dielectric (DOD) Conductor (COD) Solder Tacts series: MIL-C-38999 Contact military specificationa United States Air Force drawing no. JOD Cable diameter (in inches) SOD DOD COD Raychem Solder Tacts part number Size Polarity Cable type Wire (AWG) Series I, III, and...