* a dV/dt ratio of greater than 10 kV/μs and load voltages up to 800 V. The IL420 and IL4208 are a perfect microcontroller friendly solution to isolate low-voltage logic from high voltage 120 VAC, 240 VAC, and 380 VAC lines and to control resistive, inductive, or capacitive AC loads like motors, solen
IL420
Vishay ↗ Siliconix
195.60 KB
Optocoupler.
www.vishay.com
IL420, IL4208
Vishay Semiconductors
Optocoupler, Phototriac Output, High dV/dt, Low Input Current
A1 C2 NC 3
6 MT2 5 NC 4 MT1
2312.
📁 Related Datasheet
IL420 - 600 V TRIAC DRIVER OPTOCOUPLER
(Siemens Semiconductor Group)
IL420
600 V TRIAC DRIVER OPTOCOUPLER
FEATURES • High Input Sensitivity IFT=2 mA • Blocking Voltage, 600 V • 300 mA On-State Current • High Static dv/d.
IL4208 - 800 V TRIAC DRIVER OPTOCOUPLER
(Siemens Semiconductor Group)
IL4208
800 V TRIAC DRIVER OPTOCOUPLER
FEATURES • High Input Sensitivity, IFT=2 mA • Blocking Voltage, 800 V • Isolation Test Voltage 5300 VACRMS • 300.
IL4208 - Optocoupler
(Vishay Siliconix)
.vishay.
IL420, IL4208
Vishay Semiconductors
Optocoupler, Phototriac Output, High dV/dt, Low Input Current
A1 C2 NC 3
6 MT2 5 NC 4 MT1
2312.
IL4216 - TRIAC DRIVER OPTOCOUPLER
(Siemens Semiconductor Group)
IL4216 700 V IL4217 800 V IL4218
600 V TRIAC DRIVER OPTOCOUPLER
FEATURES • High Input Sensitivity IFT=1.3 mA • 600/700/800 V Blocklng Voltage • 300 mA.
IL4217 - TRIAC DRIVER OPTOCOUPLER
(Siemens Semiconductor Group)
IL4216 700 V IL4217 800 V IL4218
600 V TRIAC DRIVER OPTOCOUPLER
FEATURES • High Input Sensitivity IFT=1.3 mA • 600/700/800 V Blocklng Voltage • 300 mA.
IL4218 - TRIAC DRIVER OPTOCOUPLER
(Siemens Semiconductor Group)
IL4216 700 V IL4217 800 V IL4218
600 V TRIAC DRIVER OPTOCOUPLER
FEATURES • High Input Sensitivity IFT=1.3 mA • 600/700/800 V Blocklng Voltage • 300 mA.
IL4270 - POWER VOLTAGE REGULATOR
(Integral)
ТЕХНИЧЕСКИЕ ДАННЫЕ
Микросхема мощного стабилизатора напряжения 5 В/550мА с низким остаточным напряжением
IL4270 – интегральная микросхема мощного ст.
IL400 - PHOTO SCR OPTOCOUPLER
(Siemens Semiconductor Group)
IL400
PHOTO SCR OPTOCOUPLER
FEATURES • Turn On Current (IFT), 5.0 mA Typical • Gate Trigger Current (IGT), 20 µ A • Surge Anode Current, 1.0 Amp • Blo.
