SMP14A Datasheet | Vishay

FEATURES - Very low profile - typical height of 1.0 mm - Ideal for automated placement - Available in uni-directional - 400 W peak pulse power capability with a 10/1000 μs waveform - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, and telemunication. MECHANICAL DATA Case: SMP (DO-220AA) Molding pound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, Ro HS-pliant, and industrial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 μs waveform (fig. 1) (1)(2) Peak pulse current with a 10/1000 μs waveform (1) Peak forward surge current 10 ms single half sine-wave (2) Maximum instantaneous forward voltage at 25 A (3) PPPM IPPM IFSM VF Operating junction and storage temperature range TJ, TSTG Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Mounted on 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal (3) Pulse test: 300 μs pulse width, 1 % duty cycle VALUE 400 See table next page 40 2.5 -55 to +150 UNIT W A A V °C Revision: 10-Aug-2018 1 Document Number: 88481 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 .vishay. SMP3V3 thru...