WCS1700 Datasheet | Winson

Hall Effect Base Linear Current Sensor Features : - Diameter 9.0 mm conductor through hole - Output voltage proportional to AC and DC current - Wide sensing current range 0~70A at 5V volt. - High sensitivity 36 m V/A - Wide operating voltage range 3.0~12 V. - Low operating current 3m A - Isolation voltage 4000V - Ratiometric output from supply voltage - 23K Hz Bandwidth Functional Description : The Winson WCS1700 current sensor provides economical and precise solution for both DC and AC current sensing in industrial, mercial and munications systems. The unique package provides easy implementation without breaking original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection and any intelligent power management system etc… The WCS1700 consists of a precise, low-temperature drift linear hall sensor IC with temperature pensation circuit and a diameter 9.0mm through hole. Users can use system’s own electric wire by pass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing original system layout at all. Any current flowing through this hole will generate a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. The terminals of the conductive path are electrically isolated from the sensor leads. This allows the WCS1700 current sensor to be used in applications requiring electrical isolation without the use of opto-isolators or other costly isolation techniques and make system more petitive in cost. Winson reserves the right to make changes to improve reliability or manufacturability. © Winson, 2024/7/30 Page 1 Vdd Gnd +IP Current Path Vout Vout vs. Primary Current Absolute Maximum Range Supply Voltage, Vdd ----------------------- 14V Pass Through Wire Diameter------------ 9.0mm Output Current Sink ------------------...