54HC574 - Octal Edge-Triggered D-Type Flip-Flops

Texas Instruments

Datasheet Details

Part number	54HC574
Manufacturer	Texas Instruments ↗
File Size	1.98 MB
Description	Octal Edge-Triggered D-Type Flip-Flops
Datasheet	54HC574-etcTI.pdf

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving.

Wide Operating Voltage Range of 2 V to 6 V.
High-Current 3-State Noninverting Outputs Drive Bus Lines Directly or Up to 15 LSTTL Loads.
Low Power Consumption, 80-µA Max ICC.
Typical tpd = 22 ns.
±6-mA Output Drive at 5 V.
Low Input Current of 1-µA Max.
Bus-Structured Pinout.
On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessa.

📁 54HC574 Similar Datasheet

54HC573 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)
54HC541 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)
54HC589 - 8-Bit Serial or Parallel-Input/Serial-Output Shift Register (Motorola)
54HC589A - 8-Bit Serial or Parallel-Input/Serial-Output Shift Register (Motorola)
54HC595 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)
54HC597 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)
54HC00 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)
54HC02 - Rad-hard high speed 2 to 6V CMOS logic (STMicroelectronics)

Other Datasheets by Texas Instruments

Published: Jul 10, 2024 |