DLPC6540 Datasheet | Texas Instruments

Features - DLPC6540 controller using the DLP471TP digital micromirror device (DMD) supports - Up to 4K UHD at 60 Hz - Up to 1080p at 240 Hz (2D) and 120 Hz (3D) - Provides single V-by-One® HS video input port with one, two, four, or eight lanes - Up to 600-MHz pixel clock support - Up to 3.0-Gbps input transmission rate - Input formats supported - RGB, YCb Cr, and ICt Cp - 4:4:4, 4:2:2, 4:2:0 - Internal Arm® Cortex® R4F processor with FPU - 88 configurable GPIOs - Programmable PWM generator - Programmable capture and delay timers - USB 2.0 high-speed OTG controller - SPI primary/secondary controllers - I2C primary/secondary controllers - UART and interrupt controllers - Warping engine - Improved 1D, 2D, and 3D keystone correction - Optical distortion correction (radial and lateral color distortion; for example, for short throw) - Warping (multipoint manual warp and full warp map access 62 × 32 points) - Blending (manual blending and full blending map access 63 × 32 points) - Additional image processing - Dynamic Black - TI DLP® Brilliant Color™ Technology - HDR10 (PQ and HLG) support - Frame rate conversion - Color coordinate adjustment - White color temperature adjustment - Programmable degamma - Spatial-temporal multiplexing - Integrated support for 3-D display - Splash screen display and capture - Integrated 2G-bit frame memory eliminates need for external high-speed memory - External memory support - Parallel flash for µP and PWM sequences - Secondary flash for splash capture, warping - System control - DMD power and reset driver...