Datasheet4U Logo Datasheet4U.com

OPA991 - Low-Noise OpAmp

General Description

The OPAx991 family (OPA991, OPA2991, and OPA4991) is a family of high voltage (40-V) general purpose operational amplifiers.

Key Features

  • Low offset voltage: ±125 µV.
  • Low offset voltage drift: ±0.3 µV/°C.
  • Low noise: 10.8 nV/√ Hz at 1 kHz.
  • High common-mode rejection: 130 dB.
  • Low bias current: ±10 pA.
  • Rail-to-rail input and output.
  • Wide bandwidth: 4.5 MHz GBW.
  • High slew rate: 21 V/µs.
  • High capacitive load drive: 1 nF.
  • MUX-friendly/comparator inputs.
  • Amplifier operates with differential inputs up to supply rail.
  • Amplifier can.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OPA1013 Precision / Single-Supply DUAL OPERATIONAL AMPLIFIER Burr-Brown
OPA105 FET Input Military Operational AMplifier Burr-Brown
OPA111 Low Noise Precision Difet OPERATIONAL AMPLIFIER Burr-Brown
OPA121 Low Cost Precision Difet OPERATIONAL AMPLIFIER Burr-Brown
OPA124 Low Noise Precision Difet OPERATIONAL AMPLIFIER Burr-Brown

Other Datasheets by Texas Instruments

Part Number Description
OPA991-Q1 Low Noise Op Amp
OPA990 Low-Power OpAmp
OPA992-Q1 Low Noise Op Amp
OPA928 Operational Amplifier
OPA130 Precision FET-Input Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.ti.com OPA991, OPA2991, OPA4991 SBOS969D – OOCTPOAB9E9R12,0O19P–AR2E9V9IS1E,DOJPUALY42909210 SBOS969D – OCTOBER 2019 – REVISED JULY 2020 OPAx991 40-V Rail-to-Rail Input/Output, Low Offset Voltage, Low Noise Op Amp 1 Features • Low offset voltage: ±125 µV • Low offset voltage drift: ±0.3 µV/°C • Low noise: 10.8 nV/√ Hz at 1 kHz • High common-mode rejection: 130 dB • Low bias current: ±10 pA • Rail-to-rail input and output • Wide bandwidth: 4.5 MHz GBW • High slew rate: 21 V/µs • High capacitive load drive: 1 nF • MUX-friendly/comparator inputs – Amplifier operates with differential inputs up to supply rail – Amplifier can be used in open-loop or as comparator • Low quiescent current: 560 µA per amplifier • Wide supply: ±1.35 V to ±20 V, 2.