SN54HC273 - Octal D-Type Flip-Flops

Name: SN54HC273
SKU: SN54HC273-1503965

Texas Instruments

The SN54HC273 by Texas Instruments is a Octal D-Type Flip-Flops. Below is the official datasheet preview.

Datasheet Details

Part number	SN54HC273
Manufacturer	Texas Instruments
File Size	1.68 MB
Description	Octal D-Type Flip-Flops
Datasheet	SN54HC273-etcTI.pdf
Additional preview pages of the SN54HC273 datasheet.

The SNx4HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear ( CLR) input.

Wide operating voltage range of 2 V to 6 V.
Outputs can drive up to 10 LSTTL loads.
Low power consumption, 80-µA maximum ICC.
Typical tpd = 12 ns.
±4-mA output drive at 5 V.
Low input current of 1-µA maximum.
Contain eight flip-flops with single-rail outputs.
Direct clear input.
Individual data input to each flip-flop.
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted.

📁 SN54HC273 Similar Datasheet

SN54HC595J - 16-bit bus transceiver and transparant D-type latch (nexperia)
SN54GTL16612 - 18-Bit LVTTL-to-GTL/GTL+ Universal Bus Transceivers (Rev. K) (ETCTI)
SN54LS00 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS01 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS02 - QUAD 2-INPUT NOR GATE (Motorola Inc)
SN54LS03 - QUAD 2-INPUT NAND GATE (Motorola Inc)
SN54LS04 - HEX INVERTER (Motorola Inc)
SN54LS05 - HEX INVERTER (Motorola Inc)

Other Datasheets by Texas Instruments

Published: Dec 24, 2022 |