SN74ABT541B-EP - OCTAL BUFFER/DRIVER

Texas Instruments

Datasheet Details

ordering information The SN74ABT541B octal buffer and line driver is ideal for driving bus lines or buffering memory address registers.The device

inputs and outputs on opposite sides of the package to facilitate printed circuit board layout. The 3-state control gate is a two-input AND gate with active-low inputs so that if either output-enable (OE1 or OE2) input is high, all eight outputs are in the high-impedance state. When VCC is between 0 and 2.1 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 2.1 V, OE should be tied to VCC through a pullup resistor; the mi.

📁 SN74ABT541B-EP Similar Datasheet

Other Datasheets by Texas Instruments

Published: May 20, 2023 |