SN74HC273 - Octal D-Type Flip-Flops

Texas Instruments

Datasheet Details

The SNx4HC273 devices are positive-edge-triggered D-type flip-flops with a direct active low clear ( CLR) input.

Wide operating voltage range of 2 V to 6 V.
Outputs can drive up to 10 LSTTL loads.
Low power consumption, 80-µA maximum ICC.
Typical tpd = 12 ns.
±4-mA output drive at 5 V.
Low input current of 1-µA maximum.
Contain eight flip-flops with single-rail outputs.
Direct clear input.
Individual data input to each flip-flop.
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted.

📁 SN74HC273 Similar Datasheet

SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

Published: Dec 24, 2022 |