SN74HC574 - OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

Texas Instruments

Datasheet Details

Part number	SN74HC574
Manufacturer	Texas Instruments ↗
File Size	1.98 MB
Description	OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP
Datasheet	SN74HC574-etcTI.pdf

These octal edge-triggered D-type flip-flops feature 3-state outputs designed specifically for bus driving.

Wide Operating Voltage Range of 2 V to 6 V.
High-Current 3-State Noninverting Outputs Drive Bus Lines Directly or Up to 15 LSTTL Loads.
Low Power Consumption, 80-µA Max ICC.
Typical tpd = 22 ns.
±6-mA Output Drive at 5 V.
Low Input Current of 1-µA Max.
Bus-Structured Pinout.
On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessa.

📁 SN74HC574 Similar Datasheet

SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

Published: Aug 25, 2020 |