SN74HC595 - 8-Bit Shift Registers

Texas Instruments

Datasheet Details

The SNx4HC595 devices contain an 8-bit, serial-in, parallel-out shift register that feeds an 8-bit D-type storage register.

8-bit serial-in, parallel-out shift.
Wide operating voltage range of 2 V to 6 V.
High-current 3-state outputs can drive up to 15 LSTTL loads.
Low power consumption: 80-μA (maximum) ICC.
tpd = 13 ns (typical).
±6-mA output drive at 5 V.
Low input current: 1 μA (maximum).
Shift register has direct clear.
On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, p.

📁 SN74HC595 Similar Datasheet

SN74HC06 - Hex Inverter (Lingxing Microelectronics)
SN74HC182 - FUNCTION LOOK AHEAD CARRY GENERATOR (ST Microelectronics)
SN74HC423 - DUAL RETRIGGERABLE MONOSTABLE MULTIVIBRATOR (ST Microelectronics)
SN74HCT06 - Hex Inverter (Lingxing Microelectronics)
SN74H74N - Dual D-Type Flip-Flop (ETC)
SN74HSTL16918 - 9-Bit To 18-Bit HSTL-To-LVTTL Memory Address Latch (Rev. C) (ETCTI)
SN74101 - AND-OR Gate (ETC)
SN74102 - AND Gate (ETC)

Other Datasheets by Texas Instruments

Published: Aug 20, 2019 |