MNU14-187DFI Datasheet | 3M Electronics

.. Scotchlok™ Terminals MNU18-187DFI, MNU14-187DFI Female Disconnect, Nylon Fully Insulated, Butted Seam W´ W´ Data Sheet Product Number MNU18-187DFI MNU14-187DFI Wire Range (AWG) 22-18 16-14 Mates with Male Tab Width (W´ ) x Thickness 0.187 x 0.020 0.187 x 0.020 Barrel Length 0.25 0.25 Barrel I.D. 0.085 0.085 Maximum Insulation Diameter 0.145 0.145 L 0.81 0.81 W 0.30 0.30 D 0.23 0.23 Installation Information ƽ WARNING UNDERWRITERS LABORATORIES STANDARD NO. UL 486A 3M FILE NO. E23438 CANADIAN STANDARDS ASSOCIATION STANDARD NO. 22.2 NO. 0.65 3M FILE NO. LR22190 Turn power off before installing or removing terminal. All electrical work should be done according to appropriate electrical codes. UL Listed and CSA Certified for use on stranded copper (AWG) wire only. Strip away the end 3/8 inch of wire insulation. Specifications Wire Size: Barrel Seam: Insulator Max. Volt Rating: Maximum Operating Temp: Maximum Current: Insulator Material: Terminal Material: Plating: See Table Above Butted 600 V Building Wire 1000 V Signs or Fixtures (Luminaires) 221˚F (105˚C) Same as Wire Nylon Brass Tin Make the crimp in the proper station of a remended 3M crimp tool: TH-440, TH-450 (scissor style), or TR-490 (ratchet style) hand tools. Barrel Crimp (Electrical) Suitable for factory installation on steel or brass tabs. UL and CSA. Suitable for field application on brass tabs, strain relief is required. UL only. Engineering Specification .. Crimp-Type Female Disconnects shall, electrically and mechanically, connect permanently to the prestripped end of a stranded copper wire: and have a tongue portion with fingers which grip a Male Quick Slide in a separable, reusable manner, forming a Quick Connect Wiring Termination. The connector line shall offer a tongue variations (sized to grip male tabs: 0.250˝ x 0.032˝ or 0.187˝ x 0.020˝ per ANSI/NEMA CD-2) and barrel variations in wire (AWG) size (22-18, 167-14, 12-10) and construction...