TP1964 Datasheet | 3PEAK

Features 7ns, 1/2/4, Ultra-High-Speed, +3V/+5V, Beyond-the-Rails parators Description - Ultra-Fast, 7ns Propagation Delay - Ideal for +3V and +5V Single-Supply Applications - Offset Voltage: ± 10.0 m V Maximum - Rail to Rail Input and Output - 7.5m V Internal Hysteresis for Clean Switching - Push-Pull, CMOS/TTL patible Output - Input mon-Mode Range Extends 300 m V - No Phase Reversal for Overdriven Inputs - Shut-down Function (TP1961N Only) - Supply Voltage: 2.5V to 5.5V - Green, Space-Saving SOT23-5 Package Available The TP1961/TP1962/TP1964 are low-power, ultrahigh-speed parators with internal hysteresis. These devices are optimized for single +3V or +5V operation. The input mon-mode range extends 300m V beyond the rail, and the outputs can sink or source 4m A to within 80m V of GND and VCC. Propagation delay is 7ns (50m V overdrive), while supply current is 1m A per parator. The internal input hysteresis eliminates output switching due to internal input noise voltage, reducing current draw. The push-pull output supports rail-to-rail output swing, and interfaces with CMOS/TTL logic. The output toggle frequency can reach a typical of 50 MHz while limiting supply current surges and dynamic power consumption during switching. Applications - High-speed Line or Digital Line Receivers - High Speed Sampling Circuits - Peak and Zero-crossing Detectors - Threshold Detectors/Discriminators - Sensing at Ground or Supply Line - Logic Level Shifting or Translation - Window parators - IR Receivers - Clock and Data Signal Restoration - Tele, Portable munications The TP1961 single parators are available in shout-down function, and the tiny SOT23 package for space-conservative designs. All devices are specified for the temperature range of - 40°C to +125°C. 3PEAK and the 3PEAK logo are registered trademarks of 3PEAK INCORPORATED. All other trademarks are the property of their respective owners. VDD R1 R2 Ro TP1961 VOUT The TP1961 parator in IR Receivers Pin Configuration...