TPA6532 Datasheet | 3PEAK

TPA6531/TPA6532/TPA6534 5-V, 300-k Hz GBWP, Low-Power Op Amps Features Description - Supply Voltage: 1.75 V to 5.5 V - Offset Voltage: ±1.5 m V Maximum - GPWP: 300 k Hz, Slew Rate: 0.15 V/μs - Rail-to-Rail Input and Output - 0.1-Hz to 10-Hz Voltage Noise: 1 μVPP - No Significant Output Glitch when Power on and off - Low Power: 25 μA Maximum per Channel - - 40°C to 125°C Operation Temperature Range Applications The TPA653x series op-amps are CMOS single, dual, and quad RRIO op-amps with low offset, low power, and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve 300-k Hz bandwidth, 0.15-V/μs slew rate, and low distortion while drawing only 25 μA of quiescent current per amplifier which is suitable for low-power applications. The TPA653x series op-amps have 1-μVPP voltage noise at 0.1 Hz to 10 Hz, because the bipolar transistor with low 1/f noise is used as the input stage. - Sensor Signal Conditioning - Instrumentation - Industrial Control - Io T Device Typical Application Circuit .3peak. 1 / 32 AA20221202A1 TPA6531/TPA6532/TPA6534 5-V, 300-k Hz GBWP, Low-Power Op Amps Table of Contents Features ................................................................................................................................................................ 1 Applications......................................................................................................................................................... 1 Description........................................................................................................................................................... 1 Typical Application Circuit..................................................................................................................................1 Revision History...................................................................................................................................................